Boiler Tools, End Prep Machines, Panel Saws and Tube Expanding Equipment
Esco Wart Millhog Right Angle I.D. Clamping End Prep Tool
- 3/4″ I.D. to 4-1/2″ O.D
- Only 2.625in wide.
- Powerful 1.25hp motor delivers the perfect combination of speed and torque for beveling all alloys of pipe and tube.
- Heavy duty clamping system is ideal for limited access areas.
- Mounts rigidly to produce a clean, continuous chip.
- Requires no cutting lubricant.
- Simultaneously bevels, faces, and bores.
- Removes boiler tube membrane and or overlay while beveling the tube end.
- Lightweight and requires no special training.
- Efficient chatter-free cutter blade locking design.
- Torque-free operation prevents operator fatigue.
- Low maintenance, compact, air-powered tool or optional electric drive.
- Available for Sale or Rent
Esco Mongoose Right Angle I.D. Clamping End Prep Tool
- 5/8″ I.D. to 3″
- Critical width 2.25in (57.2mm) for single tube “Dutchman” boiler tube repair.
- Bevels, faces and bores stainless steel and other highly alloyed tubing.
- Patented, self-centering, push-pull clamp and release mechanism has permanently attached wrenches.
- Only 2-1/4″ wide.
- Rugged with torque-free operation.
- Powerful pneumatic motor needs only 25 cfm air flow.
- Produces a thick chip without cutting oils.
- Easy-to-change mandres.
- EscoLock blade locking system.
- Available for Sale or Rent
- Pneumatic, Electric and Battery drive options
Esco Ground Millhog Right Angle I.D. Clamping End Prep Tool
- 0.5″ I.D. to 2.25″ O.D.
- Patented push-pull clamping and release system
- Self-centering torque free operation
- Permanently attached clamps & wrenches
- Rigidly mounts to tube I.D., easy to release
- Sealed construction allows use in any orientation
- Produces a smooth, continuous chip
- Performs at any angle of bevel
- Uses TiN coated cutter blades
Esco Tube Weasel Right Angle ID Clamping End Prep Tool
- 3/4″ I.D. to 3″ O.D.
- Right angle tool rigidly mounts to tube ID.
- Sealed construction allow use in any orientation.
- Fits a “Dutchman” and handles hard alloys.
- Clamping system is self-centering and easy to use.
- EscoLock blade lock system securely holds cutting blades.
- Chatter-free end preps produce thick continuous chip.
- Torque-free operation with TiN coated cutting bits.
- Requires only (25 cfm), 708 lt./min. air flow.
- Gear head design has performed millions of end preps.
- Field proven and simple to operate and maintain
- Pneumatic, Electric or Battery Drive Options
Esco C-Hog O.D Mount Pipe and Tube Beveller
- Securely grips to the tube OD.
- Tooling is very easy to change for tubes up to 3″ OD.
- Narrow body fits 1-1/4″ membrane boiler tubes.
- Ideal for small bore heavy wall stainless steel and chrome tubes.
- Ergonomic feed with over 1″ of stroke.
- Compact, light weight and rugged.
- Uses standard MILLHOG cutting blades and the EscoLock wedge-style blade lock system.
- Robust ratchet wrenches are securely attached
Esco Prepzilla Millhog I.D Clamping Pipe Beveller
- 575″ I.D. to 8.625″ O.D.
- Only (8) sets of clamps to cover entire range.
- One mandrel covers entire range.
- Optional Toll Post holds third cutter blade and increases pipe beveling capabilities.
- Single point attachment allows preps on all wall thicknesses at any angle.
- Optional cross feed for flange facing, pipe grooving and severing.
- EscoLock blade locking system for maximum blade life.
- Dual opposed tapered roller bearings deliver rock solid performance.
- Heavy duty clamping system does not break.
- Directional exhaust.
- Low R.P.M. with tremendous torque.
- Produces thick chips on all highly alloyed tube and pipe, without cutting fluids.
Commander Millhog I.D Clamping Pipe Beveling Tool
- 3-3/4″ I.D. to 14″ O.D.
- One mandrel and 7 sets of clamps cover entire range.
- Wide clamp ribs spread the contact force for superior clamping.
- 3hp pneumatic straight drive motor (Hydraulic motor drive with speed control available, consult factory)
- Available off-set gear box reduces the rpm and multiplies the torque.
- Motor drive options are easily changed and are interchangeable with the “Dictator”.
- Ultra rugged gears and dual opposed tapered bearing set-up deliver, produces a low maintenance tool designed for years of trouble free service.
- Fully Portable for on-site use.
- Available for sale or rent.
Esco Dictator I.D Clamping Pipe Beveling Tool:
- 5” I.D to 18” OD
- One mandrel and 8 sets of clamps needed to cover entire range.
- Three powerful drive motors:
- 3 hp pneumatic straight drive motor
- 1800 watt electric motor
- Hydraulic motor drive with speed control
- Available off-set gear box reduces the rpm and multiplies the torque.
- Motor drive options are easily changed and are interchangeable with the “Commander”.
- Self-centering draw rod actuated clamping system.
- Wide Clamps produce superior clamping force for chatter free end preps.
- Uses standard MILLHOG cutter blades.
- All gear drives are interchangeable with “Commander”.
- Fully portable for on-site and shop work.
- Available for sale or rent
Esco Panelhog Universal Air Powered Saw
- For cutting boiler tube panel & removing membrance, cutting pendant tube, working around clusters of large pipe & cutting big tanks
- Provides accurate cuts with no “HAZ” heat affected zone
- Eliminates rework & griding before end prepping
- Safety relief valve prevents running at excessive speed
- Cuts tough material with a high percentage of chrome
- Powerful 3 HP pneumatic motor operates on 90 psi shop air
Esco Wrap Track Saw Kits
- Cutting Pipe from 6″ – 60″ O.D.
- Requires less than 6 1/4″ radial clearance
- Set up & cut a 10″ Sch. 160 pipe in under 10 minutes